ADE Circuits

Re: ADE Circuits

thebeestingbutterfly — Sat, 30 Oct 2010 00:34:04 GMT

Whenever we have had leaky issues we use the thick hibbiscrub mix and apply it over the said area and look for air bubbles, that might help in this situation???

Re: ADE Circuits

Shelly vn — Fri, 29 Oct 2010 18:06:28 GMT

Thanks Gillian! I'll have a look at the soda lime canister, it hasn't been re filled for a while, but i'll have another look at it. Hopefully won't have to contact anaequip! The boss is away and won't be too happy if we have to get it fixed!

Re: ADE Circuits

Gillian Mostyn — Fri, 29 Oct 2010 13:49:57 GMT

Is it definately the main bit, or could it be the soda lime canister? I ask because every time we've had a leaking issue it has been because the canister has been refilled and the base not screwed down tightly afterwards. The 2 biggest reasons seems to be either soda lime having fallen into the holes where the screws fit (we cover the holes with tape before filling) or the rubber seal getting in the way.

If you do need it repaired, contact anaequip

http://www.anaequip.com/index.htm